0 items in your basket
Total £ 0.00 EX VAT
Multi Process Welders
MIG Torches
TIG Torches
Welding Helmets
Welding Gloves & Clothing
MMA Electrodes
MIG Wire
Shop 55,000 Products
SERVICEDEPT.
RAPID BLOG
FEEDBACK
HIRE
Answers for buyers choosing a complete small air-cooled micro TIG torch package with a superflex lead.
A micro TIG torch is a very small, light air-cooled torch with a slim neck and small head, designed for fine work: thin sheet, small fabrications, instrument and tube work, and joints where a standard torch will not fit. Its size gives you a better view of the weld pool and more precise control in tight spaces.It is a low-current tool, not a general-purpose torch. For thicker material or long runs at high current, a larger torch, usually with a higher rating, is a better choice. Check the torch rating against the current you plan to weld at.
Air-cooled torches need no cooler unit, water hoses or coolant, so they are simpler to set up, maintain and move around. They suit lower-current and intermittent work, and the maximum current depends on the particular torch.Water-cooled torches can generally carry higher currents for longer because the coolant removes heat, but they need a separate cooler and extra hoses. For a micro torch used at low current on thin material, air cooling is the usual and practical choice. Check that your intended current and duty cycle fall within the rating on the torch data plate or in the manual.
A superflex lead is a lightweight, very flexible hose for the power and gas supply, usually with a soft rubber or silicone-type inner and a braided outer layer. It is lighter and more pliable than a standard hose, so it pulls less on the torch head, which helps with fine control and reduces hand fatigue.Even so, protect it from sharp edges, hot metal and kinks, and check the maker's instructions for the correct torch series and connection type before ordering a replacement.
Yes, small torches suit thin sheet because you can work at low current with fine control. Thin material burns through easily, so keep the current low, move steadily and ease back if the pool becomes too fluid.Tungsten diameter should match the current: a smaller diameter makes arc starting easier at very low amperage, while larger sizes suit higher currents. Ceriated or rare-earth types are often chosen for low-current work. Keep the tungsten sharp and clean, and check the maker's current guide for the collet and tungsten sizes your torch accepts.
